The short version
A post-construction clean removes labels, film, adhesive, specks of paint or stucco, and dust from the glass, frames and tracks. New glass needs gentle handling, some marks may not fully come off, and it is best booked once the dusty work is done.
What the trades leave on the glass.
Windows go in early on most projects. After that, the glass sits through drywall, painting, siding, stucco, landscaping and cleanup. By the time the keys are handed over, most windows are carrying a bit of every trade.
These are the things we usually look for:
- Manufacturer labels and stickers, and the glue they leave behind.
- Protective film that has been left on too long and baked on in the sun.
- Paint overspray and small drips from the interior and the trim.
- Specks of stucco, mortar or concrete on the outside glass and frames.
- Caulking smears along the edges of the glass.
- Drywall dust in the tracks, on the sills and on the inside of the glass.
- Tape residue from painters’ tape and masking.
Why it is not a regular clean.
A regular window clean mostly deals with dust, pollen, water spots and fingerprints. A squeegee and the right solution take care of it. Construction residue is different. It sticks to the glass, and some of it is hard enough to scratch the glass if it gets dragged across it.
That means each pane gets checked and treated before it gets wiped. Labels and adhesive get softened first. Hard specks get loosened slowly instead of rubbed. Tracks and sills usually need to be vacuumed or brushed out before they can be wiped, because the dust in them turns into paste as soon as it gets wet. All of this takes longer than a maintenance clean.
New glass needs a gentle hand.
Scraping is a common way to remove stubborn residue, but it is not right for every pane. Some heat-treated (tempered) glass can carry tiny bits of debris from the factory on its surface. A blade can drag those bits across the pane and leave fine scratches. Some glass also has coatings that should never be scraped.
So the method depends on the glass. We look at the windows first, check what kind of glass we are working with where we can, and choose a gentler approach where scraping is a risk. If a mark cannot be removed safely, we would rather tell you than force it.
It is also worth knowing that a clean cannot remove damage that is already there. Scratches and etching from wet stucco or concrete are in the glass, not on it. If we notice marks like that, we will point them out.
Frames, tracks, sills and screens.
On a new build, the glass is only part of the job. Dust settles in the window tracks, on the sills and along the frames. Screens are often still in their wrapping, stacked in the garage, or covered in drywall dust.
A post-construction clean usually covers the frames, sills and tracks as well as the glass, with screens cleaned and put back where they belong. Tell us if the screens are stored somewhere other than the windows, so we can plan for them.
For a homeowner checklist before any window visit, see getting ready for window cleaning.
When to book it.
Timing matters more than most people expect. If the glass is cleaned and then the drywall gets sanded or the yard gets graded, the dust comes right back.
The best time is once the dusty work is done: after the final interior paint and sanding, after siding and stucco, and ideally after the heavy landscaping. In much of the Okanagan, new neighbourhoods keep building around you for a while, and our summers are hot and dry. Dust from nearby lots and gravel roads can settle on fresh glass quickly, so it can make sense to plan one clean at move-in and another once the street settles down.
We wrote about building dust on tall glass in Upper Mission and Kettle Valley homes.
Homes, renovations and commercial spaces.
The same kind of clean fits a new house, a renovation where new windows went in, or a commercial space getting ready to open. A builder or general contractor may want it done before a final walkthrough. A homeowner may want it before move-in. A shop may need the storefront glass clean before opening day.
Whoever is booking, it helps to know a few things up front: roughly how many windows there are, how high the tallest ones are, what kind of residue is on them, and whether the site is still active.
Start with an assessment.
Every post-construction job is different, so we do not quote it like a standard clean. We look at the glass, the residue and the access first, then quote the work. Describe what is on the windows when you get in touch, and send a photo if you can. If a streak is spotted within 48 hours of our clean, we come back and fix it free.
Book a free quote online, or call us at 778-583-5057.
Common questions
Can I just peel the stickers and scrape the paint off myself?
You can peel labels gently, but avoid dry scraping or scrubbing. Hard specks and grit can scratch the glass when dragged across it, and some new glass scratches more easily than you might expect.
Will every mark come off?
Most construction residue does. Scratches and etching from stucco or concrete are damage to the glass itself, and a clean cannot remove them.
When should I book a post-construction window clean?
After the dusty work is finished: final sanding and paint inside, siding and stucco outside, and ideally the heavy landscaping. Otherwise the dust comes back.
Do you clean the tracks and screens too?
Yes. Tracks, sills and frames usually hold most of the construction dust, so they are part of the job. Let us know where the screens are if they are not on the windows.
Ready to plan your clean?
See what the service includes, or request a free quote for your property.
Explore commercial & strata windowsGet a Free Quote