The short version
Dry dust off first, wash with mild soap and water, rinse and dry. Clear the weep holes gently, keep wood frames from soaking, and check your window maker’s care notes before using anything stronger. Every Beam’s residential window clean includes a frame wipedown.
Why frames and sills get so dirty.
Glass is smooth, so rain and a squeegee move dirt off it. Frames and sills are different. They have ledges, corners and grooves where dust settles and stays.
In the Okanagan, a lot lands there. Dry summers mean dust off roads and yards. Spring brings pollen, and smoke seasons can leave a grey film and bits of ash. Bugs and webs gather in the top corners. On the inside, winter condensation runs down the glass and sits on the sill.
Clean glass in a dirty frame still looks unfinished. That is why the frame is worth a few extra minutes.
What you need.
Nothing special. A basic kit works for most frames:
- A soft brush, or a vacuum with a brush attachment.
- A bucket of warm water with a few drops of mild dish soap.
- A soft sponge or cloth.
- A few clean, dry microfibre cloths.
- An old soft toothbrush or small bottle brush for corners and drain holes.
Step by step.
Work from the top of the window down, so dirt falls onto parts you haven’t cleaned yet.
- Brush or vacuum off loose dust, webs and dead bugs while everything is dry. Wiping wet grit around scratches the finish and makes mud in the corners.
- Wipe the frame and sill with soapy water and a soft sponge. Use the toothbrush in the corners.
- Rinse with a clean, damp cloth so no soap film is left behind.
- Dry everything with a microfibre cloth, including the corners where water collects.
- Do the glass last, so drips from the frame don’t land on clean glass.
Screens and sliding tracks need their own method. See how to clean window screens and tracks.
Vinyl, wood and aluminum need different care.
Vinyl is the most common frame on newer homes. Window makers generally say mild soap and water is all it needs. Avoid solvents, petroleum-based cleaners and abrasive pads. They can dull, scratch or discolour the surface.
Wood frames are usually painted or stained. Use a cloth that is damp, not dripping, and dry the wood right away. Look for peeling paint or soft spots while you clean, especially on the bottom rail and sill where water sits. Those are worth fixing before more moisture gets in.
Aluminum frames are tough, but the coating can still be scratched. Mild soap, a soft cloth and a good dry are enough. Chalky white marks on old aluminum are often worn coating, not dirt, and they may not wipe away.
If you still have your window paperwork, follow the maker’s care notes first. Some have their own rules for coloured or painted frames.
Keep the weep holes open.
Many windows have small slots on the outside of the bottom frame, often with little flaps over them. These are weep holes. They let rain that gets into the frame drain back out.
When they fill with dust, needles or bug nests, water can back up in the frame. That can lead to drips on the inside sill. Clear them gently with a small soft brush or a pipe cleaner. If you use wire, only push it in as far as you need to clear the blockage, so you don’t damage the sealed glass unit.
A quick test: pour a little water into the outside track and watch it drain out through the holes.
What to skip.
A few habits do more harm than good:
- Pressure washing windows. A hard jet can force water past seals and into the frame and wall.
- Scrub pads, steel wool or razor blades on the frame.
- Bleach, solvents or strong degreasers.
- Soaking wood frames or leaving water pooled on the sill.
- Oil-based sprays in the tracks. They hold onto dust.
Inside sills in winter.
In cold months, the inside sill often gets wet every morning from condensation. Wipe that water up when you see it. Water left sitting can stain wood, lift paint and grow mildew in the corners.
If you see black spots in the corners, clean them with mild soap and water and dry the area well. Then look at the cause, which is usually indoor humidity and air flow.
For more on that, read foggy windows in winter.
Let us do the frames with the glass.
Frames are easy on a main floor window. They are harder on second-storey glass, over a slope or behind shrubs. Those are worth handing off.
Every Beam’s residential window clean includes screens, tracks and a frame wipedown, along with the glass. If you spot a streak within 48 hours, we come back and fix it for free. Some marks are not dirt, like worn coatings, old paint stains or hard water spots, and those may not fully come off. We look first and tell you what is realistic.
Request a free quote online, or call or text 778-583-5057.
Common questions
What is the best thing to clean window frames with?
Warm water with a few drops of mild dish soap and a soft sponge. Rinse with a damp cloth and dry with microfibre.
Can I use bleach or solvents on vinyl frames?
It isn’t recommended. Window makers warn that solvents and harsh cleaners can damage vinyl. Stick to mild soap unless your window’s care guide says otherwise.
What are the little holes on the outside of my window frame?
Weep holes. They drain water out of the frame. Keep them clear of dust, needles and bug nests so water doesn’t back up.
Does Beam’s clean frames and sills?
Yes. Every residential window clean includes screens, tracks and a frame wipedown.
Further reading
Ready to plan your clean?
See what the service includes, or request a free quote for your property.
Explore residential window cleaningGet a Free Quote