The short version
Clean in the shade or on a cloudy day. Use a small amount of cleaner, not a lot. Dry with a clean microfibre cloth or a squeegee instead of paper towels, and change your water when it gets dirty. If a mark stays after all that, it may be a hard water spot rather than a streak.
Reason one: the sun dried it first.
This is the most common cause. When sun hits the glass, it warms up and the cleaner evaporates fast. Whatever was in the water, like dirt, soap and minerals, dries in place before you can wipe it away. That leaves lines and haze.
Okanagan summers are hot and dry, so this happens quickly here. A south or west facing window in July can dry before you finish one pane. Clean in the shade, early in the morning or on a cloudy day. Work on one window at a time so nothing sits and dries.
Reason two: too much soap or cleaner.
More soap does not mean cleaner glass. Extra soap stays on the window as a thin film. In the light it shows up as smears or a rainbow haze.
Use only a small amount of cleaner in your water. If the glass feels slippery or tacky after it dries, there is product left on it. Wipe it again with a damp, clean cloth, then dry it.
Reason three: the wrong cloth.
Paper towels shed tiny fibres on wet glass. They also tend to push water around instead of soaking it up. Old cloths that were washed with fabric softener can leave a film too.
A clean, dry microfibre cloth works better. Keep one cloth for washing and a separate one for drying. Swap the drying cloth as soon as it gets damp, because a wet cloth just moves the water around.
Reason four: dirty water and a dirty blade.
If you clean several windows with the same bucket, the water picks up dirt as you go. By the last window, you are spreading grey water on the glass. Change it when it starts to look cloudy.
Squeegees help a lot, but the blade has to be clean and in good shape. Wipe the blade after every stroke so you do not drag dirt across the glass. A nicked or worn rubber blade leaves a line of water in the same spot every pass. Replace it when that starts to happen.
Dirty frames and tracks can drip back onto clean glass. Here is how to clean window screens and tracks first.
Is it a streak or a hard water spot?
Some marks are not streaks at all. White or cloudy spots on lower windows, patio doors and glass railings are often mineral spots from sprinklers. Water carries minerals, and when it dries on the glass, the minerals stay behind.
A simple test: clean the area and dry it fully. A streak from cleaning wipes off with a dry microfibre cloth. A mineral spot does not. If it looks gone when wet but comes back when dry, or you can feel roughness with a fingernail, it may be built up or etched into the glass. Older etching may not fully come off, even with professional work.
Our guide to removing sprinkler stains from windows covers what to try on those.
Inside or outside? A quick trick.
It is frustrating to clean a window twice and still see a line. To find which side the streak is on, wipe the inside in one direction and the outside in the other. For example, go side to side on the inside and up and down on the outside.
When you spot a streak afterwards, look at which way it runs. Sideways means the inside, up and down means the outside. Now you only have to redo one side.
When to call in help.
Some windows are hard to get right yourself. Upper storey glass, big picture windows and glass you cannot reach safely from the ground are good reasons to hand it off. Do not stand on a chair or climb a ladder you are not comfortable on to chase a streak.
A Beam’s residential window clean includes screens, tracks and a frame wipe-down. Exterior window cleaning starts at $225, and interior work starts at $135. If you spot a streak within 48 hours of our clean, tell us and we will come back and fix it for free.
If you have marks that will not come off, point them out at the quote visit and we will tell you what is possible before we start. Request a free quote online, or call or text 778-583-5057.
Common questions
Why do my windows look streaky only when the sun hits them?
Low or direct sunlight shows up film and lines that you cannot see in flat light. The streaks were there already; the sun just makes them visible.
Are paper towels bad for cleaning windows?
They often leave lint and push water around. A clean, dry microfibre cloth or a squeegee usually gives a better finish.
How much soap should I use to clean windows?
Very little. Too much soap leaves a film that shows up as smears once the glass dries.
What if the marks stay after I clean them?
They may be mineral spots or etching rather than streaks. Fresh spots often come off, but older etching may not fully come off. Point them out when you ask for a quote.
Ready to plan your clean?
See what the service includes, or request a free quote for your property.
Explore residential window cleaningGet a Free Quote